Für jede Anwendung die richtige Lösung [Translate]
The maintenance-free microprocessor-controlled on-wall sensor AERASGARD® ACO2 - SD with automatic calibration (fixed) is used for detecting the CO2 content of the air within a range of 0...2000 ppm or 0...5000 ppm. The measurement value is converted into standard signal of 0 -10 V.
The maintenance-free microprocessor-controlled on-wall sensor AERASGARD® ACO2 - W with automatic calibration (can be deactivated via DIP switches) is used for detecting the CO2 content of the air within a range of 0...2000 ppm or 0...5000 ppm. The measurement value is converted into standard signal of 0 -10 V or 4...20 mA.
The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology). The detection range of the CO2 sensor is calibrated for standard applications such as monitoring residential rooms and conference rooms. Room ventilation on an as-needed basis, improved well-being and customer benefit, increased comfort as well as reduced operating costs through energy conservation are just some of the benefits of employing AERASGARD® CO2 sensors.
A measuring system based on NDIR (non-dispersive infra-red technology) for CO2 measurement consists of a light source and a receptor. A certain range of wavelengths of light radiated by the source is damped and absorbed by CO2 molecules in the measured section. This damping is detected by the receptor.
|Voltage supply||24 V AC ⁄ DC (± 10 %)|
< 1.5 W ⁄ 24 V DC typical;
< 2.9 VA ⁄ 24 V AC typical;
peak current 200 mA
|Measuring range, CO2||
multi-range switching (selectable via DIP switches)
0...2000 ppm; 0...5000 ppm
|Measuring accuracy, CO2||typically ± 30 ppm ± 3 % of measured value|
|Temperature dependence, CO2||
± 5 ppm ⁄ °C or ± 0.5 % of measured value ⁄ °C
(whichever is higher)
|Pressure dependence||± 0,13 % ⁄ mm Hg|
|Gas exchange||by diffusion|
|Relay output||without changeover contact|
|Warm up time||approx. 1 hour|
|Response time||approx. 1 minute|
|Output||0 -10 V (fixed)|
0 -10 V or 4...20 mA (selectable via DIP switches,
selected variant applies for all outputs), working resistance < 800 Ω
optical NDIR sensor
(non-dispersive infra-red technology),
with manual calibration (via zero button) and
automatic calibration (fixed)
|Ambient temperature||–10...+60 °C|
|Process connection||by screws|
|Protective tube||stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm|
|Electrical connection||0.14 - 1.5 mm² via terminal screws|
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
|Enclosure dimensions||126 x 90 x 50 mm (Tyr 2)|
M 16 x 1.5; including strain relief,
|Long-term stability||< 2 % in 15 years|
|Protection class||III (according to EN 60 730)|
|Protection type||IP 65 (according to EN 60 529)|
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
|WS-03||Weather and sun protection||Weather and sun protection||7100-0040-6000-000||37,74 €|
ISH Messe Frankfurt – S+S Regeltechnik looks forward to meeting you!
11. - 15.03.2019
Stand 10.3 A71
At the ISH, the world's leading trade fair for "The Bathroom Experience,...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...