Construction progress of the Giga factory for sensor technology
The structural work on the production halls and offices at our new location in Nuremberg, Germany is nearing completion. Construction is progressing according to plan, so we are well positioned for the future and the increasing demand for our sensors.
Watch the videoGroundbreaking ceremony for significant growth
The office and manufacturing space alone at the new S+S location in Nuremberg will be expanded to 8,600 m² in order to meet the increasing demand for advanced sensor devices.
Watch the videoWith Giga factory for sensors to become the #1 on the market
On a total area of over 14000 square meters, the new S+S company headquarters is being built in the north of Nuremberg.
Watch the videoProducts especially for industry
Industrial Design
Specialists in pressure
Multi-range measuring transducers for pressure, differential pressure and volume flow
PREMASGARD 211x / 212xEfficient, convenient and network-enabled
Elegant appearance, touch-operated interface, large display, and Modbus-compatible
RYMaskon
Multi-funtional duct sensor
For humidity, temperature, pressure, differential pressure and volume flow for monitoring and controlling heating, ventilation and air-conditioning systems
PREMASGARD® 814x-Modbus
One basic device in multiple versions
Calibratable immersion, screw-in or duct temperature measuring transducer
THERMASGARD® TM65-Modbus-T3
Electronic frost protection monitor
2-phase thermostat with continuous and switching output for reliable prevention of frost damages and freezing
THERMASREG® FS-20
Für jede Anwendung die richtige Lösung [Translate]
Maintenance-free room sensor AERASGARD® RCO2 - SD with active output, automatic calibration
(fixed), in an elegant plastic housing with snap-on lid, for determining the CO2 content of the air
(0...2000 ppm). The measuring transducer converts the measured values into a standard signal
of 0 -10 V.
Maintenance-free room sensor AERASGARD® RCO2 - W with active/switching output, automatic
calibration (can be deactivated), in an elegant plastic housing with snap-on lid, optional with traffic light
indicator (five coloured LEDs), for determining the CO2 content of the air (0...2000 ppm/0...5000 ppm).
The measuring transducer converts the measured values into a standard signal of 0 -10 V or 4...20 mA
(switchable).
The sensor is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of
evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis,
thereby reducing operating costs and improving well-being.
The CO2 measurement is performed using an optical NDIR sensor (non-dispersive infra-red technology).
The detection range is calibrated for standard applications such as monitoring residential rooms and
conference rooms.
| Voltage supply | 24 V AC/ DC (± 10 %) |
|---|---|
| Power consumption |
< 1.5 W/ 24 V DC typical; < 2.9 VA/ 24 V AC typical; peak current 200 mA |
| Service life |
> 60 months (under normal load conditions) depending on the type of loading and gas concentration |
| Output, CO2 | 0 -10 V or 4...20 mA (selectable via DIP switches) |
| Measuring accuracy | typically ± 30 ppm ± 3 % of measured value |
| Temperature dependence, CO2 |
± 5 ppm/ °C or ± 0.5 % of measured value/ °C (whichever is higher) |
| Pressure dependence | ± 0,13 %/ mm Hg |
| Gas exchange | by diffusion |
| Relay output | with potential-free changeover contact 24 V (assignment selectable via DIP switches) |
| Warm up time | approx. 1 hour |
| Response time | < 2 minutes |
| Output |
0 -10 V or 4...20 mA, working resistance < 800 Ω (selectable via DIP switches) with offset potentiometer (± 10 % of the measuring range |
| Sensor |
Optical NDIR sensor (non-dispersive infra-red technology), with manual calibration (via zero button),
with automatic calibration (can be deactivated via DIP switches) |
| Measuring range | 0...2000 ppm or 0...5000 ppm (selectable via DIP switches) |
| Ambient temperature | 0...+50 °C |
| Electrical connection | 0.14 - 1.5 mm² via terminal screws |
| Housing |
plastic, material ABS, colour pure white (similar to RAL 9010) |
| Dimensions | 98 x 98 x 33 mm (Baldur 2) |
| Installation |
wall mounting or on in-wall flush box, Ø 55 mm, base with 4 holes, for attachment to vertically or horizontally installed in-wall flush boxes for rear cable entry, with predetermined breaking point for cable entry from top/ bottom in case of plain on-wall installation |
| Long-term stability | < 2 % in 15 years |
| Protection class | III (according to EN 60 730) |
| Protection type | IP 30 (according to EN 60 529) |
| Standards |
CE conformity, electromagnetic compatibility according to EN 61 326, EMC Directive 2014/ 30/ EU, Low Voltage Directive 2014/ 35/ EU |
| Display | with display for displaying the actual CO2 content in ppm |
Light + Building 2020 – S+S Regeltechnik will be there
27.09. - 02.10.2020
Hall 9.1 | Booth A84
Be our guest at the world's leading trade fair for light, design and intelligent...
more
THERMASGARD® TM65-Modbus -T3 - Calibratable immersion, screw-in or duct temperature measuring transducer
Patented high-quality product (patented immersion sensor, DE 10 2012 017 500.0) – basic device with...
more
PREMASGARD® 211x, 212x and 212x-SD - Compact and flexible specialists in pressure
These calibratable compact sensors from S+S can manage up to eight switchable measuring ranges from...
more
Light + Building 2020 | Frankfurt am Main | 27.09. - 02.10.2020
more
