Für jede Anwendung die richtige Lösung [Translate]
The electronic airflow monitor RHEASGARD® KLGF measures the flow velocity in m ⁄ s and converts the measurement signal to a standard signal of 0 - 10 V (relative) (flow measuring transducer). The flow sensor available with ⁄ without an optional display.
The RHEASREG® KLSW provided with a switching output (one-step or two-step) is designed as flow sensor ⁄ flow monitor. Fine adjustment of the measuring range end value by the user is possible with the help of a potentiometer.
The airflow monitor ⁄ airflow sensor is used for monitoring or controlling airflows in ducts, at ventilators and dampers, for flow-dependent monitoring of humidifiers and electric heating registers according to DIN 57100, part 420, or for use in connection with DDC systems.
|Voltage supply||24 V AC ⁄ DC|
|Operating range||0.1...30 m ⁄ s (adjustable)|
|Sensitivity||0.1...30 m ⁄ s|
1 or 2 potential-free relays (changeover contacts)
8 A, max. 2 kW or 0 - 10 V (relative, linearised on request)
|Measuring range||0.1...30 m ⁄ s|
|Ambient temperature||0...+60 °C at the device; 0...+80 °C medium|
|Medium||pollutant-free, non-precipitating air|
|Switching hysteresis||approx. 1…10 % (adjustable)|
|Start bridging||approx. 15...120 s (adjustable)|
|Switch-off delay||approx. 2 ...20 s (adjustable)|
by mounting flange
(included in the scope of delivery)
|Max. sensor cable length||
50 m, avoid laying parallel with mains voltage-carrying lines,
or use shielded cables, minimum cross section 1.5 mm2
per conductor, apply cable screen one-sided
metal (brass, nickel-plated), Ø 10 mm,
nominal length NL = 140 mm
|Sensor||sensor breakage protection, temperature-compensated|
0.14 - 1.5 mm²
via terminal screws on circuit board
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
|Dimensions||72 x 64 x 37,8 mm (Tyr 1)|
|Protection class||III (according to EN 60 730) at UB = 24 V|
|Protection type||IP 65 (according to EN 60 529)|
EMC directive 2014 ⁄ 30 ⁄ EU,
low-voltage directive 2014 ⁄ 35 ⁄ EU
GET Nord - S + S Regeltechnik is here
22. - 24.11.2018
Be our guest at the international trade fair for electrical, sanitary, heating...
SPS IPC Drives – S+S Regeltechnik will be there
27. - 29.11.2018
Be our guest at Europe's leading trade fair for electric automation from 27 to...
Multi-functional duct sensor for monitoring and control of heating, ventilation and air-conditioning systems
This bus capable and calibratable pressure measuring transducer enables the control of differential...
Good room climate is measurable! - AERASGARD® FSCO2 ⁄ FSTM-CO2 ⁄ FSFTM-CO2-Modbus
Our multifunctional room sensors for measuring temperature, humidity and CO2 concentration can now...